Monday, November 11, 2013

The waste ink Pads in Epson L110 printer

Hello friends, in my previous post, i have given you information about the ink resetting in Epson L110 printer.

Now yesterday, i have found out the location of the Waste ink Pad in Epson L110.

Just turn the Epson L 110 Printer around to the back, pull the paper in tray up, just next to the power plug socket, you would find a screw. Just use a star screw driver, to unscrew the screw.



























This is the only lock to the Wast ink Pad set up. Now lock the check valve to the ciss tank, so that there is no out flow of ink, when you turn the printer upside down.



Remove the ciss tank from the main Printer frame.



Now turn the printer upside down 50%, not a 100 % upside down.

Now move the paper output tray from the bottom a little to the front. On the left side of the bottom of the Epson L 110 printer, the Waste Ink Pad is located, a big rectangular box, with Waste ink pads stuffed in it.








Now move the Waste Ink Pad compartment a little to the right, the chamber would unlock itself and pull the chamber out.



If you want to reuse the Waste Ink Pad, you could saturate the Waste Ink Pads in alcohol, then dry them and again use it in the printer.




But all i would suggest to use is a Waste Ink Tank bottle to be mounted new. This time in this printer, Epson technical department has thought very meticulously and done a new trick to stop refilling by bulk inks.

Commercially, there is no Waste Ink Tank Bottle or kit available in the market. But you can make one by yourself. I have already done a Waste Ink Tank myself. It is being tested for some time.

 I will talk about this in my next post.

warm wishes.

18 comments:

  1. Ink Pad Reset Software is not required for resetting. Remove the waste Ink Pad from the bottom as shown above. Do not spend your hard earned money on buying software keys. Buy good quality non genuine ink for your Epson L 110 printer.

    Set up a waste tank reservoir as suggested above. I have been using this printer with some modifications for the last 6 months. No problems yet

    warm wishes.

    ReplyDelete
    Replies
    1. hpw could i reset the ink pad after i clean up? still my printer is not working after i did the instructions above. Thanks

      Delete
  2. waste ink pads website, has been making money by selling the serial key for a free to install software. The software might be your copyright. But there is no need to pay hard earned money to fix a very good printer, which has more miles to go before bidding good bye to your living room or office. Hence, just open your eyes, read the blog carefully and then act according to save money. Already 1800 blog hits have been recorded for my blog. Save money, Make your future bright.

    If you have any questions, please email me at pulikesi2@gmail.com

    warm wishes.

    ReplyDelete
  3. Thanks for nice sharing. You can also find latest Printing technology in Splashjet.co.in. Printing technology has witnessed a sea change with the advent of modern printers, latest software and advanced printing methods. For more information Visit epson printer ink.

    ReplyDelete
  4. i already did the instructions on how to clean the ink pads. Still the light didnt stop signalling that still not working. Many thanks

    ReplyDelete
  5. there are lots of third party inks for epson L 110 printer on ebay.in

    Please find the best option, and try out for refilling your own printer

    ReplyDelete
  6. Dear Palaniappan! How can i make by myself a Waste Ink Tank?

    ReplyDelete
  7. Waste tank could be made out of a fanta bottle, i think 500 ml. Cut out the top, so that you have wider mouth. You should have remove the waste ink pad tray at the bottom of the printer. The tray would have 4 layers of sponges, just throw them out, as keeping them would no longer have any use. Throwing away the holding tray also, it is detachable. Sine it hold the sponges, as you have thrown away the sponges, there is no need for a sponge tray. Then you should place your printer on the cardboard box in which it was delivered to you. You can use any card board box, you wish to use. We can make use of the packing material also. Just put the card box upside down on a your computer table, then place your epson L 110 printer and then connect all the wires, usb cables, just the printer should be placed on the box so that the sponge tray which you removed should facing down in to the cut fanta bottle. Any waste ink will fall in to the wide cut fanta bottle. You could put a few newspapers on the bottom, it will never become a mess. as the ink would fall down drop by drop only. There is no need to throw out the waste ink in the fanta bottle, it will never get filled up, as there is space for around 300 - 400 ml. Once your waste tank gets filled up, make another waste tank to fit in.

    warm wishes.

    ReplyDelete
  8. Thanks Dear God Bless You...!!!!

    ReplyDelete
  9. You can download reset program from http://driversupports.com/epson-l110-resetter-free-download/
    I had try and it work fine and also no need key or serial

    ReplyDelete
  10. thank you sir it is help me big

    ReplyDelete
  11. You also can try reset your epson l110 with WIc Reset Utility tool, download epson l110 resetter here

    To avoid epson L110 waste ink counter, you can read instruction here - How to avoid Epson L110 waste ink counters overflow

    ReplyDelete
  12. If Epson inkjet printer is not giving clear outputs then to fix that it is advisable to check the connection between the system and the printer after that also see to it that the ink cartridges are properly filled with ink and also they should be installed correctly. Lines are open for help and support all the time.
    Contact No.:
    UK: +44-800-368-9067
    USA: +1-209-813-2790
    Website: http://www.epson-contact.com/epson-inkjet-printer-support/
    Address: United Kingdom, United State

    ReplyDelete

  13. thank you for support great article
    Download Free Epson L380 Resetter And more Epson resetters

    ReplyDelete